Zodiac AquaLink M8, Руководство по установке

Страница: 5 / 44

Page 5
AquaLink
®
M8 | Installation Manual
Page 4
AquaLink
®
M8 | Installation Manual
CAUTION
Power to the Aqualink should be supplied by an isolating transformer or through a residual current device (RCD)
with a rated residual operating current not exceeding 30mA.
SAVE THESE INSTRUCTIONS
WARNING
People with infectious diseases should not use a spa or hot tub.
To avoid injury, exercise care when entering or exiting the spa or hot tub.
Do not use drugs or alcohol before or during the use of a spa or hot tub to avoid unconsciousness and possible
drowning.
Before entering a spa or hot tub, measure the water temperature with an accurate thermometer.
Do not use a spa or hot tub immediately following strenuous exercise.
Prolonged immersion in a spa or hot tub may be injurious to your health.
Do not permit any electric appliance (such as a light, telephone, radio, or television) within 3.5 metres of a spa or
hot tub.
The use of alcohol, drugs or medication can greatly increase the risk of fatal hyperthermia in hot tubs and spas.
Water temperature in excess of 38°C (100°F) may be hazardous to your health.
Attention Installer: Install to provide drainage of compartment for electrical components.
WARNING
A terminal bar marked "GROUND" is provided within the controller. To reduce the risk of electrical shock which can
cause serious injury or death, connect this terminal bar to the grounding terminal of your electric service or supply
panel with a continuous copper conductor having green insulation and one that is equivalent in size to the circuit
conductors supplying this equipment in accordance with the latest, enforced version of AS/NZS 3000 and any other
applicable local installation codes. In addition, where required, bonding should be extended in accordance with
the latest, enforced version of AS/NZS 3000 and any other applicable local installation codes to any metal ladders,
water pipes, or other metal within 3.5 m of the pool/spa.