ZIEHL-ABEGG ZETADYN 4C, Перевод оригинальной инструкции по эксплуатации

Страница: 103 / 204

InfoBus - - - - - - - - - 20
Ident No 01234567
Exist: xxxx
Error 0000
Page 20: InfoBus
Display of frequency inverter con
fi
guration
Line 2:
Ident no. of the internal assemblies
0: Controller Unit (CU)
1: Shunt module (CUSH)
2: reserved
3: reserved
4: reserved
5: Switching Power Print (SP)
6: Power Print (PP)
7: Module Print (MP)
Line 3:
Each available board is identi fi ed in accordance with the population of the frequency inverter
(see also menu "HW Ident."):
x: identi
fi cation of the board by reading out the EEPROM
m: identi
fi
cation by manual default in the menu "HW-Ident."
Line 4:
Error allocation of the assembly
1: No answer
2: Incorrect or unknown object
3: No proper EEPROM connection
4: No or unknown part number
5: No or unknown index
6: Original and backup copy are not identical
During
fl
awless operation, all internal assemblies must be displayed with a "0"
TravelDirection - - - 21
TD_SET 10.00 M
TD_CNT 4.32 M
TD_DRV 18.45 M
Page 21: Travel direction
Display the direction changes
Line 2:
TD_SET: Initial value of the down counter
Line 3:
TD_CNT: Travel direction counter, resettable.
Displays the remained travel direction changes with the actual rope.
After resetting the travel direction counter, TD_RES will be increased
Line 4:
TD_DRV: Total counter of the travel direction changes.
Value remains after resetting the down counter
TravelDirection - - -
21
TD_RES 10
TD_CNT 4.32 M
TD_DRV 18.45 M
Page 21: Travel direction
While pressing the button,
line 2
shows the actual number of counter resets "TD_RES".
Cuec - - - - - - - - - - -
22
Func: DCP & CAN & AN
Stat: GRN
Page 22: Cuec
Expansion board "Control"
Line 2:
Func: Functions of the expansion board "Control"
Line 4:
Stat: LED status of the expansion board "Control"
Translation of the original operating instructions
ZETADYN 4C
Parameter list
R-TBA12_01-GB 1415 Part.-No. 00163371-GB
103/204
1
1
Parameter
list