ZES ZIMMER LMG450, Руководство пользователя

Страница: 145 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 10
145
Value: 0...65535 List: n/a
Unit: n/a Group: n/a
Reads an individual number of the measuring cycle counter which is copied into memory. This
value runs up to 65535 and starts then again at 0.
10.2.4.1.2.2 :SNUMber? SCTC?
SCPI: :FETCh[:SCALar]:CYCLe:SNUMber? /qonly/ | :READ[:SCALar]:CYCLe:SNUMber? /qonly/
SHORT: SCTC? /qonly/
ID: n/a Mode: All
Type: long int Suffix: n/a
Value: 0...2
31
-1 List: n/a
Unit: n/a Group: n/a
Reads the number of the last sample value of a cycle. The sample values of the instrument are
counted. At the end of each cycle this counter is stored and can be read by this command. The
counter runs up to 2
31
-1 and starts then again at 0. See also 10.2.10.14.5, ‘:SCTRigger?
SCTT?’
10.2.4.1.2.3 :TIME? CYCR? Mtime
SCPI: :FETCh[:SCALar]:CYCLe:TIME? /qonly/ | :READ[:SCALar]:CYCLe:TIME? /qonly/
SHORT: CYCR? /qonly/
ID: Mtime Mode: Normal, prCE, Flicker, HARM100
Type: float Suffix: 1...14
Value: n/a List: n/a
Unit: s Group: n/a
Reads the real measuring time of the measuring cycle. This is the time for an integer number of
periods of the measured signal (in average this is the cycle time, but it depends on the signal!).
10.2.4.1.3 :DINPut? DIST?
SCPI: :FETCh[:SCALar]:DINPut? /qonly/ | :READ[:SCALar]:DINPut? /qonly/
SHORT: DIST? /qonly/
ID: digin(), see 4.4.4.2.7, ‘Functions’ Mode: All
Type: long int Suffix: 1,2
Value: 0...64 List: n/a
Unit: n/a Group: n/a
Reads the status of the digital inputs. The bits in the answer have following meanings:
Bit 0: Input 1
Bit 1: Input 2
Bit 2: Input 3
Bit 3: Input 4