ZES ZIMMER LMG450, Руководство пользователя

Страница: 98 / 306

Normal measuring mode LMG450
98
dy scaling of the y axis per division
y0 offset of the y axis (value of the centre line)
c value of the function at the cursor position
Below the graphs the time depending values are displayed:
dt scaling of the x axis per division
c1 x value of the first cursor
c2 x values of the second cursor
cdt time difference between the cursors
The following settings can be done with the softkeys on the right side:
Chn changes the displayed channel (A-D)
Signl Pressing this softkey a list will open, in which you can adjust the following parameters
(refer chapter 4.5):
Signl here you can select the signal to be plot
y/div here you can select the scaling factor of the Y axis
y0 here you can select the offset of the y axis (value of the centre line). Example: If
you select y0 = 200V and y/div = 10V the you will see a window from 180V to 220V on the
screen.
Each setting is confirmed with Enter and rejected with Esc.
-y- pressing this softkey - the rotary knob symbol appears in the upper left corner - the
adjustments of the y axis can be changed while the plot is running. Each pressing of the
button toggles between the parameters dy and y0. The adjusted values can be changed
with the rotary knob. The adjustments will be confirmed by pressing the rotary knob or
with the Enter key.
Move here the cursors are selected. With the rotary knob the cursors will scroll through the
plot. For easy reading of the values the plot should be frozen. The scrolling of the
cursors can be done for each cursor separately or for both together.
c1 the first cursor is moved. below the graphs the values for the x position in
seconds and the value of the function are shown.