ZES ZIMMER LMG450, Руководство пользователя

Страница: 202 / 306

Interfaces (IEEE option L45-O1) LMG450
202
counter is stored and can be read by this command. The counter runs up to 2
31
-1 and starts
then again at 0. See also 10.2.4.1.2.2, ‘:SNUMber? SCTC?’
You always get the value of group A.
10.2.10.14.6 :SRATe? GFRQ?
SCPI: :SENSe:WAVeform:SRATe? /qonly/
SHORT: GFRQ? /qonly/
ID: n/a Mode: All
Type: float Suffix: n/a
Value: n/a List: n/a
Unit: n/a Group: n/a
Reads the record rate of the sampled values.
10.2.10.14.7 :SSAMples SSAM
SCPI: :SENSe:WAVeform:SSAMples <NRi>
SHORT: SSAM <NRi>
ID: n/a Mode: All
Type: long int Suffix: n/a
Value: see below List: n/a
Unit: n/a Group: n/a
Reads and sets which sample values are stored in the memory. See also ‘:SENS:WAV:IUPD’
for further information. The parameter has following meaning:
Bit 3: i
Bit 4: u
Bit 5: p
The Bits are counted from 0!
10.2.10.14.8 :WAVE? WAVE?
SCPI: :SENSe:WAVeform:WAVE? /qonly/ <NRi>,<list>
SHORT: WAVE? /qonly/ <NRi>,<list>
ID: n/a Mode: All
Type: float Suffix: 1...12
Value: n/a List: see below
Unit: n/a Group: n/a
Before using this command you should freeze the memory with :MEMory:FREeze, to avoid
data losses at long transfer duration. Reads out sample values specified with <NRi>:
4: i
5: u
6: p