![background image](http://html2.mh-extra.com/html/zeiss/opmi-lumera-700/opmi-lumera-700_instructions-for-use-manual_3325017091.webp)
Instructions for Use
4 Installation
OPMI LUMERA 700
4.2 Preparing the installation
G-30-1673-en - 14.0 - 2018-07-12
91 / 236
• The IT network to which the device is to be connected must
have the following features:
– IPv4, static or dynamic address.
– Any IP address.
• The IT network to which the device is to be connected must
have the following configuration:
– The firewall is open for inbound ports.
– All data is transmitted unsecured from the device to the
customer's secured internal network.
– No data is transmitted externally from the device.
• Requirements in relation to network connection with the
device:
– The IT network has a RJ45 network connection, at least
Cat.5, 100 Mbit/s.
– The device has a network isolator in compliance with IEC
60601-1 which means it is not connected to the IT network
power supply.
– The operator is responsible for the topology of the IT
network, the flow of information and the routing between
the device, the IT network and other devices.
Содержание opmi lumera 700
