Zeiss opmi lumera 700, Инструкция по эксплуатации

Страница: 147 / 236

Instructions for Use 7 Operation
OPMI LUMERA 700 7.4 Configuring the software for specific users
G-30-1673-en - 14.0 - 2018-07-12 147 / 236
7.4.1 Configuring the 14-function foot control panel
The 14-function foot control panel's buttons and rocker switches
can be assigned user-specific functions [
}
76]. If the RESIGHT 700 is
swiveled in and you would like to control the RESIGHT 700's
internal focus, the rocker switches must be assigned the following
RESIGHT focus functions:
• RESIGHT focus -
• RESIGHT focus +
Prerequisite
þ
The surgery profile you wish to configure is activated.
þ
In order for the RESIGHT focus functions to be assigned to the
"I" and "H" rocker switches, the RESIGHT function [
}
136] must
be assigned to the activated surgery profile.
Action 1. Open the main menu.
2. Tap the [Additional Settings] menu button.
3. Tap the [Foot control panel] submenu button.
ð The "Foot Control Panel" menu will appear.
4. Tap the buttons whose assignments you would like to change.
ð
The list of available functions will appear.
5. Select the function you would like to assign to the selected
button on the 14-function foot control panel.
ð
The function will be displayed on the button.
6. To save the changes to the surgery profile: tap the
button.
Check the button assignments and functions on the 14-function
foot control panel before each use and without the patient present.
7.4.2 Configuring the handgrips
The buttons and directions of rotation on the handgrips can be
assigned user-specific functions [
}
76].
Prerequisite þ The surgery profile you wish to configure is activated.