Zeiss opmi lumera 700, Инструкция по эксплуатации

Страница: 175 / 236

Instructions for Use 7 Operation
OPMI LUMERA 700 7.6 Typical operating sequence
G-30-1673-en - 14.0 - 2018-07-12 175 / 236
7.6.2 Carrying out the working steps
User
"Dr. Mustermann"
Surgery profile
"Cataract"
Surgery profile
"Retina RESIGHT"
Surgery profile
"Retina Contact"
Press "P"
Swivel RESIGHT 700 into position
or press "P"
Swivel RESIGHT 700 out of position
or press "P"
Figure 74: Carrying out the working steps (example)
Prerequisite
þ
A surgery profile has been created for each phase of surgery.
þ The sequence of surgery profiles has been configured.
Action 1. If you have not already done so, swivel the device into its
working position.
ð
The "Cataract" surgery profile will become activated.
2. Conduct a cataract surgery .
3. To conduct a retina surgery with RESIGHT 700 : swivel the
RESIGHT 700 into position.
ð
The second surgery profile will become activated.
ð
The device will load the device settings saved to the surgery
profile.
4. To conduct a retina surgery with contact glasses : swivel the
RESIGHT 700 out.
ð
The third surgery profile will become activated.
ð
The device will load the device settings saved to the surgery
profile.
5. Following the operation, if you would like to return to the first
surgery profile: press the configured "P" button on the
handgrip or the 14-function foot control panel.
Result
ü
The first surgery profile will become activated again.
Device settings such as illumination, focus and total magnification
can be changed during the individual phases of surgery. Depending
on the configuration you are using, this can be done via the 14-
function foot control panel, the handgrips or the control panel.
7.6.3 Stopping work
Action 1. Swivel the surgical microscope into the park position [
}
120].