YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 137 | Manualshive

Страница: 137 / 258

YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 137

8-8

IM DL350-01EN

• Data Format (Format)

You can select the format to save to from the options listed below.

• PNG: The extension is .PNG. The file size is approximately 50 KB for black and white mode and

approximately 100 KB for color mode.

• The extension is .BMP. The file size is approximately 70 KB for black and white mode and approximately 1

MB for color mode.

• The extension is .JPG. The file size is approximately 250 KB for color mode.

The file sizes listed here are for reference. Actual file sizes will vary depending on the image that is saved.

• Color (Color)

You can select the color format to save to from the options below.

•  OFF: Saves data in black and white.
•  Color (Color): Saves data using 65536 colors.
•  Color (reverse) (Color (Reverse)): Saves data using 65536 colors. The screen background will be white.

This option appears when the

is set to black (Black).

• Gray (Gray): Saves data using 16 grayscale levels.

• Background Transparent or Opaque (Background)

For PNG format, you can save the waveform display area with a transparent background. This feature is

convenient when you want to compare waveforms by overlaying screen captures on the PC.
• Normal (Normal): Saves data without changing the background (not made transparent).
• Transparent (Transparent): Saves data by making the background transparent.

FFT Analysis Results (FFT)

You can save the analysis results of FFT1 or FFT2 to a file in CSV format. The extension is .CSV.

Setting the File Name (FileName Setup)

Frequency Information (Frequency Info.)

You can select whether to save frequency information along with computed results.
• ON: Frequency information is saved.
• OFF: Frequency information is not saved.

Decimal Point (Decimal Point)

Harmonic Analysis Results (Harmonics)

You can save harmonic analysis results to a file in CSV format.

Setting the File Name (FileName Setup)

Unit (Unit)

You can select whether to save the units of measure along with the measured results.
• ON: Units are saved.
• OFF: Units are not saved.

Saving (Execute Save)

Saves the data to the specified save destination with the specified file name.

8 Saving and Loading Data

«
...
135
136
137
138
139
...
»

Содержание ScopeCorder DL350



































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды