manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 227

23-5

IM DL350-01EN

Key and Touch Settings (Key/Touch)

START/STOP Key Response Time (START/STOP Response Time)

You can set the response time of the START/STOP key to instant (Quick) or 1 s or more (> 1sec).

Key and Touch Lock (Key/Touch Protect)

You can lock the control keys and touch panel to prevent unintentional changes to the current state of the 
instrument.
•  Protect Target (Protect Target)

Select whether to lock the keys and touch panel or only the touch panel.

•  Turning Password Release On and Off (Password Release)

Select whether to require a password to unlock keys.

•  Password (Password)

Specify the password using up to eight alphanumeric characters.

•  Applying Key and Touch Lock (Protect)

Applies key and touch lock.

Menu Settings (Menu)

Color Theme (Color Theme)

Set the color theme to black (Black) or white (White).

Channel Information (Channel Information)

Select the information to display in the channel information area at the bottom of the screen.
•  Setting: Vertical scale, input coupling, probe attenuation, and bandwidth limit are displayed.
•  Value: Measured data is displayed.

Custom Menu (Custom Menu)

Select the menu to assign to the user menu in the lower right of the screen.

Scope 

Mode

Recorder Mode

Menu

Yes

Yes

Not Assign: No menu

Yes

Yes

Acquire: Waveform acquisition

Yes

Yes

Display: Display

Yes

Yes

Save: Data saving

Yes

Yes

Load: Data loading

Yes

Yes

Cursor: Cursor measurement

Yes

Yes

Measure: Automated measurement of waveform parameters

Yes

Yes

Math: Computation

Yes

Yes

FFT: FFT

Yes

Yes

X-Y: X-Y waveform

Yes

Yes

Harmonic: Harmonic analysis

Yes

Yes

Search: Waveform search

Yes

—

History: History waveform display

—

Yes

Easy Setup: Easy Setup

Yes

Yes

Initialize: Initialization

Yes

Yes

AutoSetup: Auto setup

Yes

Yes

Calibration: Calibration

Yes

—

Snap Shot: Snapshot

Yes

Yes

Clear Trace: Clear trace

Yes

Yes

Event: Event

Yes

Yes

Key and Touch Lock: Key/Touch Protect

  Yes: Selectable
  —: Not selectable

23  Other Features

Содержание ScopeCorder DL350



































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды