manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 216

22-1

IM DL350-01EN

22  Ethernet Communication (Network)

You can configure TCP/IP parameters and use the optional Ethernet interface to perform the following tasks.

TCP/IP

TCP/IP settings for connecting to an Ethernet network.
Set the IP address, subnet mask, and default gateway.

Web Server (Web Server)

You can connect the instrument as a Web server to a network.
You can connect to the instrument from a PC on the same network and monitor the instrument display from the 
PC.

Mail (Mail)

The action can be set to mail transmission.

Network Drive (Net Drive)

You can save waveform data and setup data to a network drive.

SNTP

The instrument clock can be set using SNTP. The instrument can be configured to automatically adjust its clock 
when it is turned on.

VXI11 (VXI11)

Set the timeout.

  To connect a PC to the instrument, use a hub or router, and connect to a network. Do not connect a PC 

directly to the instrument.

Содержание ScopeCorder DL350



































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды