manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 128

7-8

IM DL350-01EN

Horizontal Scale (Horizontal)

This is a setting in recorder mode.

Display Time (Display Time)

Set the waveform display time by specifying the time from the left edge to the right edge of the waveform screen. 
The time scale of the waveform screen changes automatically according to the specified display time.

Selectable range
From the 

acquisition time

 setting until the number of data points in the waveform window becomes 10 points/div

Display Position (Position)

Set which point (ddhhmmss) between the left edge and the right edge of record time will be displayed at the 
center of the waveform.
The display time is the box enclosed by a solid line on the record time bar graph. The center position of the 
display time is expanded to display the waveform.

Record Time (Record Time)

Display position (Position)

Display Time (Display Time)

Acquisition/recording 

time bar graph

Auto Scrolling (Auto Scroll)

This is a setting in recorder mode.
You can scroll the display time automatically in the specified direction. You can view the waveform and stop 
scrolling at the appropriate position.

Displays the left edge of the recording time bar graph
Displays the right edge of the recording time bar graph
Stops scrolling
Starts scrolling to the left
Starts scrolling to the right

Speed (Speed)

You can select the auto scrolling speed in the range of 1 to 10.
•  –: Decreases the speed
•  +: Increases the speed

7  Display

Содержание ScopeCorder DL350



































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды