![YOKOGAWA AE100D Скачать руководство пользователя страница 197](http://html.mh-extra.com/html/yokogawa/ae100d/ae100d_instruction-manual_911083197.webp)
IM 1F6A0-01E
5-10
5. BASIC OPERATING PROCEDURES
5.5.2 Displaying Flow Rate Data
Flowrate data can be displayed on the BT200 screen
according to the following procedure.
F050406.EPS
Turn the power on and the
screen on the left
“Please wait....” is
displayed for a few
minutes.
Pressing the “ENTER” key
causes the initial data
screen on the left to be
displayed.
Pressing the “F4” or
“ENTER” causes the menu
screen on the left to be
displayed.
Executing Function Key
F1 : Updates the current data.
F2 : Displays the self-check
screen.
F3 : Displays the parameter
print sreen.
F4 : Returns to the previous
panel. (menu panel)
With “A : DISPLAY”
displayed on the menu
panel in the inverse video
bar, press “ENTER” key
and the flow data screen
appears.
Maximum three data items
can be displayed on one
screen.
The tag number
specified upon
ordering is entered.
Inverse Video Bar
or
Function Key
–––WELCOME–––
BRAIN TERMINAL
ID:BT200
Check connection
Push ENTER key
UNTIL FEED
MENU
A:DISPLAY
B:EASY SETUP
C:BASIC SETUP
D:AUX. SETUP
E:METER SETUP
H:ADJUST
HOME SET ADJ ESC
PARAM
01:MODEL
digitalYEWFLO
02:TAG NO.
03:SELF CHECK
GOOD
OK
PARAM
A10:FLOW RATE(
%
)
80.0
%
A20:FLOW RATE
100m3/h
A30:TOTAL
1417
DATA DIAG PRINT ESC
PARAM
A10:FLOW RATE(
%
)
80.0
%
A20:FLOW RATE
100m3/h
A30:TOTAL
1417
DATA DIAG PRINT ESC
●
Function key
The functions of the function keys vary with the commands
being displayed on the display panel.
Table 5.4
ADJ
CAPS/caps
CLR
COPY*
DATA
DEL
DIAG
ESC
FEED*
HOME
LIST*
NO
OK
PARM
PON/POFF*
PRINT*
SET
SLOT
GO*
STOP*
UTIL
Calls up the adjustment menu.
Changes the uppercase / lowercase mode.
Clears entered data / deletes all data.
Prints parameters on the screen.
Updates parameter data.
Deletes one character.
Calls up the self-check screen.
Returns to the preceding screen.
Paper feed.
Calls up the home menu (A : DISPLAY).
Prints all parameters of the menus.
Setting stop / re-setting. Returns to the
previous screen.
Goes to the next screen.
Parameter number setting mode.
Printer output of data whose setting was
changed Mode on / off.
Changes to the prints mode.
Calls up the setting menu (B : SETTING).
Returns to the slot selection screen.
Starts print out.
Stops printing.
Transfers to the utility screen.
Command
Description
T050401.EPS
*The command is available only for BT-200-P00
Содержание AE100D
Страница 2: ......
Страница 333: ...Blank Page ...
Страница 395: ...Blank Page ...
Страница 401: ...Blank Page ...