For not all inputs are available at the same time, for every counter you may define the
input assignment via the parameterization for the following input signals:
n
Counter
x
(A)
–
Pulse input for counter signal respectively track A of an encoder for 1-, 2- or 4-fold
evaluation.
n
Counter
x
(B)
–
Direction signal respectively track B of the encoder. Via the parameterization you
may invert the direction signal.
n
Gate 3
–
Via this input you can if parameterized open the HW gate of
Counter 3
with edge
0-1 and start counting.
n
Latch 3
–
Via this input via edge 0-1 the current counter value of
Counter 3
is stored in a
memory that you may read if needed.
VIPA System SLIO
Deployment I/O periphery
Counting > Wiring
HB300 | CPU | 013-CCF0R00 | en | 16-40
103
