manualshive.com logo in svg

Xerox WORKCENTRE 5755, Руководство системного администратора

Поделиться
Скачать
Xerox WORKCENTRE 5755 Скачать руководство пользователя страница 83

Network Installation

Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

75

Static IP Addressing

At the Machine

Note:

To configure this feature or these settings access the 

Tools

 pathway as a System 

Administrator. For details, refer to 

Access Tools Pathway as a System Administrator 

on page 10.

1.

From the 

Tools

 pathway, touch

 [Network Settings]

.

2.

Touch

 [Network Setup]

.

3.

Touch

 [TCP IP]

.

4.

Touch 

[TCP/IP Settings]

. 

5.

Touch 

[TCP/IP Enablement]

, in the 

TCP/IP Enablement

 screen

a.

Touch 

[Enable]

 for 

IPv4

 and 

IPv6

.

Note:

Any changes to the IPv6 feature will result in a reboot of the Network Controller.

b.

Touch

 [Save]

.

6.

Touch 

[Automatic Addressing]

.

a.

Touch

 [Disabled]

 to disable Automatic Addressing.

b.

Touch

 [Save]

.

7.

Touch

 [IP Address/Host Name]

, the 

IP Address/Host Name

 screen displays.

a.

For 

IPv4 Address

, touch each octet and enter the IP Address using the numerical keypad.

b.

For 

Host Name

, touch the 

detail

 bar.

c.

Enter Host Name using the on-screen keyboard. To access more characters, touch

 [123]

 on 

the user interface. 

d.

Touch

 [Save]

, then touch 

[Save]

 to return to the 

TCP/IP Settings

 screen.

8.

Touch

 [Subnet and Gateway]

, the 

Subnet and Gateway

 screen displays.

a.

For 

IP Gateway

, touch each octet under the title and enter the IP Gateway address using the 

numerical keypad.

b.

Repeat this process for the 

Subnet Mask

. When you are finished, touch

 [Save]

 to accept the 

changes and return to the 

TCP/IP Settings

 screen. 

c.

Touch

 [Close]

 to return to the 

TCP/IP

 screen.

9.

Touch

 [HTTP/IP Enablement]

, the 

HTTP/IP Enablement

 screen displays.

a.

For 

Protocol

, ensure 

Enable

 is selected. If not, touch

 [Enable]

.

b.

Touch

 [Save]

, then touch 

[Close] 

to return to the 

Tools

 pathway.

10. Touch 

[TCP/IP-Line Printer]

, on the 

TCP/IP - Line Printer

 screen displays.

a.

Touch 

[Enable]

, to enable the option.

b.

If you wish to change the LPR port for your device, touch the port number area and enter the 
desired port number using the numerical keypad.

Note:

You can change the port number at which your device will accept LPR print jobs. Do this 

ONLY with extreme caution as most LPR spoolers are set to send print jobs to the default port of 
515.

c.

Touch 

[Save]

 to return to the 

TCP/IP

 screen.

d.

Touch 

[Close]

 to return to the 

Tools

 pathway.

Содержание WORKCENTRE 5755





































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды