Xerox WORKCENTRE 5755, Руководство системного администратора

Страница: 164 / 356

Authentication
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 156
5. Click on the [Configure] button for Device User Interface Authentication - Xerox Secure Access .
a. The Xerox Secure Access Setup screen displays. The device will automatically configure itself
to work with the XSA remote server. Click on the [Manually Configure] button if the XSA
remote server does not configure automatically.
b. In the Server Communication area, select either [IPv4 Address] or [Hostname] .
c. Enter details in the [IP Address: Port] or [Host Name: Port] fields.
d. Enter the details in the [Path] field.
e. Under the Device Log In Methods heading, select one of the following:
• Xerox Secure Access Device Only (e.g., Swipe Cards - if you want to allow the user to
swipe their swipe cards at the UI.
• Xerox Secure Access alternate on-screen authentication method - if you
want users to authenticate using the device’s control panel as well as the XSA feature.
When the second option is enabled, a button labelled “Alternate Login” is displayed on
the “Instructional Blocking Window” providing users with an alternate method to log in.
For example, this feature can be enabled for users who are unable to use their swipe
card. When the alternate button is selected, the remote server presents a series of log in
screens on the local user interface. The remote server is still responsible for
authenticating the user. All other Xerox Secure Access options are supported with this
setting.
f. Under the Accounting Information heading, note that this item will be grayed out if
Network Accounting is not enabled. If accounting is enabled, select [Automatically apply
Accounting Codes from the server] , if the Secure Access Server has been configured to
return the accounting User ID and Account ID login. If you want the user to enter these
values at the local user interface during login, select
[User must manually enter accounting
codes at the device] .
g. Under the Device Instructional Blocking Window heading, enter text in the [Window Title]
and [Instructional Text] fields to create the prompt that will be displayed on the device’s
user interface informing users how to authenticate themselves at the device.
Note: If the Title and Prompt have been configured on the Secure Access Server, then this
information will override the Title and Prompt text entered here.
h. Click on the [Save] button when done.
6. Click on the [Close] button to return to the Authentication Configuration page.
Enable Web User Interface Authentication
A second, networked Authentication Server will be necessary for web user interface Authentication, if
Remotely on the Network was selected. Full instructions for configuring network authentication, using
Kerberos, NDS, SMB, and LDAP/LDAPS are contained in the Network Authentication section of this
guide.
The path to the Authentication Server configuration screen is:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to Access Internet Services as System Administrator on page 16.
1. From the Properties tab, click on the [Security] link.
2. Select [Authentication Configuration] in the directory tree.