manualshive.com logo in svg

Xerox WORKCENTRE 5755, Руководство системного администратора

Поделиться
Скачать
Xerox WORKCENTRE 5755 Скачать руководство пользователя страница 341

Troubleshooting

Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

333

Scanning Using SMB (Server Message Block)

Test the configuration of the scan filing location by attempting to connect to the shared folder (the 
scan filing location) from another PC, with the user account and password created for the device. 
Create a new folder within this location and try to delete it. If you cannot perform this function check 
the user account rights. Verify that the information has been properly set in the Internet Services File 
Repository Setup page.

Scanning Using HTTP(S)

From a TCP/IP networked workstation, test the connection to the web server by Telnet. From a 
command prompt, start a Telnet session, log in to the device's directory on the web server, and send a 
POST request and file to the web server. Check to see if the file was received at the repository. If the file 
was not received, refer to 

HTTP/HTTPS 

on page 195.

The fault requires further investigation.

Refer to the Xerox website at www.xerox.com for further support.

Troubleshooting: E-mail

If you are experiencing problems with sending an E-mail, first verify the device is connected on the 
network and functioning as a printer by performing the following activities:

•

Check the network cable at the back of the device.

•

Send a test page from your PC to the device.

•

If connected via TCP/IP try a PING from your workstation to the device.

Configure your device on the network or resolve any networking issues before attempting to use the E-
mail feature. 

Ensure E-mail is Installed Correctly

At the device, verify that you have an E-mail feature icon on the device screen interface and that it is 
not grayed out or unavailable. For instructions to configure the device on the network, refer to 

Enable 

TCP/IP and HTTP at the Device 

on page 11.

To view the E-mail feature icon, you may need to press the 

<Services Home>

 button.

Enable E-mail before proceeding. For instructions refer to 

E-mail 

on page 231.

Note:

If you have enabled E-mail but the icon is grayed out or unavailable. 

To enable this feature, access the 

Tools

 pathway as a System Administrator. For details, refer to 

Access Tools Pathway as a System Administrator 

on page 10. From the 

Tools

 pathway:

•

Touch 

[Service Settings]

, touch 

[Optional Services]

.

•

Touch 

[E-mail]

. 

•

The 

E-mail Service

 screen displays. Select 

[Enable]

, and touch 

[Save]

. 

Verify that the E-mail Settings Have Been Correctly Configured on the Device by Printing a 
Configuration Report.

Содержание WORKCENTRE 5755





































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды