Xerox WORKCENTRE 5755, Руководство системного администратора

Страница: 30 / 356

General Setup
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 22
At the Device:
1. Press the <Machine Status> button on the device.
2. Touch the [Machine Information] tab.
3. Touch [Print Reports] .
4. Touch [Print Report] .
5. Touch [Close] .
To Prevent the Configuration Report to Print at Power On
At the Device:
Note: To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to Access Tools Pathway as a System Administrator on page 10.
1. From Tools pathway, touch [Device Settings] .
2. Scroll down by touching the scroll-down button, touch [Configuration Report] .
a. The Configuration Report screen displays, for At Power On , touch the [Do Not Print Report]
button.
b. Touch [Save] .
3. Press the <Log In/Out> button.
4. Touch [Logout] to exit the Tools pathway.
Configure Print Protocols
1. At your Workstation, open the web browser and enter the IP Address of the device in the Address
bar, and press
<Enter> .
2. At the welcome page, click on the [Configure Device] button.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111] .
4. Click on the [Login] button.
5. If you want to use the checklist, click on the [View Checklist] button and click on the [Print]
button. Scroll to the bottom of the screen and click on the [Close] button.
6. Click on the [Settings] button next to Print Protocols .
7. Click on the [Configure] button next to General Settings to configure general print settings.
8. In the General area:
a. For Device Start-Up Page , check the [Enabled] checkbox to enable a start-up page to print
at device start-up.
b. Enter the time to pass, in minutes, for the device to timeout in the [Timeout] field. The range
is 0-7200, the default is 30 minutes.
9. In the Banner Sheet area:
a. For Use Generic User Name and Job Name , check the [Enabled] checkbox, to print the
generic user and job names on the banner sheet for the print jobs instead of the names
submitted with the jobs.
b. For Banner Sheets , check the [Enabled] checkbox to allow a banner sheet to print with every
print job.