manualshive.com logo in svg

Xerox WORKCENTRE 5755, Руководство системного администратора

Поделиться
Скачать
Xerox WORKCENTRE 5755 Скачать руководство пользователя страница 198

Workflow Scanning

Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

190

•

Ensure you have the Scanning Kit.

•

Ensure that the TCP/IP and HTTP protocols are configured on the device and fully functional.

This is required to access Internet Services to configure Workflow Scanning. The Internet Services 
function is accessed through the embedded HTTP server on the device and enables System 
Administrators to configure scan settings by using an Internet browser.

•

If you require color or grayscale scanning, or scan to JPEG you will need the Color Scanning 
Enablement Kit.
The Kit can be purchased from your Xerox Sales Representative. Follow the instructions with the 
Color Scanning Enablement Kit to ensure the Kit is installed before you continue with the Network 
Scanning instructions.

Enable Workflow Scanning

Print a Configuration Report:

1.

Press the 

<Machine Status>

 button.

2.

Touch the 

[Machine Information]

 tab.

3.

Touch 

[Print Reports]

.

4.

Touch

 [Print Reports]

.

5.

Touch 

[Close]

.

The Configuration Report will print. On the report, check under the 

Workflow Scanning Setup 

heading 

if 

Workflow Scanning Enabled

 is enabled.

At the Device:

Note:

To configure this feature or setting access the 

Tools

 pathway as a System Administrator. For 

details, refer to 

Access Tools Pathway as a System Administrator 

on page 10.

1.

From the 

Tools

 pathway, touch 

[Service Settings]

.

2.

Touch 

[Optional Services]

.

3.

Touch 

[Workflow Scanning]

.

4.

Touch 

[Enable]

.

5.

Touch 

[Save]

.

6.

Press the 

<Log In/Out>

 button.

7.

Touch 

[Logout]

 to exit the Tools Pathway.

Configure a File Repository

Scanning with the device is accomplished through user selection of templates on the device that route 
scanned jobs to network servers. After storage on the server, the files can be retrieved at any properly 
configured networked workstation. A dedicated file server is not required to receive scans. A dedicated 
server is required, however, for the installation and use of SMARTsend software to remotely manage 
the pool of templates (workflows), displayed locally to device users, if so desired. Scanning is 
configured on the device using one of the file transfer options below. 

•

FTP (File Transfer Protocol):

 Requires an FTP server running on a server or a workstation.

•

NetWare NCP (NetWare Core Protocol):

 Available for filing to a NetWare server.

Содержание WORKCENTRE 5755





































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды