manualshive.com logo in svg

Xerox WORKCENTRE 5755, Руководство системного администратора

Поделиться
Скачать
Xerox WORKCENTRE 5755 Скачать руководство пользователя страница 67

Network Installation

Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

59

8.

Touch

 [Subnet and Gateway]

, the 

Subnet and Gateway

 screen displays.

a.

For 

IP Gateway

, touch each octet under the title and enter IP Gateway address using the 

numerical keypad.

b.

Repeat this process for the 

Subnet Mask

. When you are finished, touch

 [Save]

 to accept the 

changes and return to the 

TCP/IP Settings

 screen. 

c.

Touch

 [Close]

 to return to the 

TCP/IP

 screen.

9.

Touch

 [HTTP/IPP Enablement]

, the 

HTTP/IPP Enablement

 screen displays.

a.

For 

Protocol

, ensure 

Enable

 is selected. If not, touch

 [Enable]

.

b.

Touch

 [Save]

, then touch 

[Close] 

to return to the 

Tools

 pathway.

10. Touch 

[TCP/IP-Line Printer]

, the 

TCP/IP - Line Printer

 screen displays.

a.

Touch 

[Enable]

, to enable the option.

b.

If you wish to change the LPR port for your device, touch the port number area and enter the 
desired port number using the numerical keypad.

Note:

You can change the port number at which your device will accept LPR print jobs. It is 

recommended that you do this ONLY with extreme caution as most LPR spoolers are set to send 
print jobs to the default port of 515.

c.

Touch 

[Save]

 to return to the 

TCP/IP

 screen.

d.

Touch 

[Close]

 to return to the 

Tools

 pathway.

For Dynamic IP Address

Installation via DHCP (Dynamic Host Configuration Protocol)

DHCP is enabled on the device by default. If the device is connected to the network the TCP/IP 
information will be configured when the device is powered on and no further configuration is required.

Note:

To configure this feature or these settings access the 

Tools

 pathway as a System 

Administrator. For details, refer to 

Access Tools Pathway as a System Administrator 

on page 10.

1.

From the 

Tools

 pathway, touch

 [Network Settings]

.

2.

Touch

 [Network Setup]

.

3.

Touch

 [TCP IP]

.

4.

Touch 

[TCP/IP Settings]

. 

Note:

All options under the 

IP Address/Host Name 

section will be grayed out until DHCP is 

deselected in the Dynamic Addressing section. Follow the next step to disable DHCP and access 
these options if required.

5.

Touch 

[Automatic Addressing]

, by default, DHCP will be selected. Select the required dynamic 

addressing method 

[BOOTP]

, 

[DHCP]

, or 

[RARP]

.

Note:

To give the device a static IP Address, touch

 [Disabled]

 to disable Automatic Addressing.

a.

Touch 

[Enabled]

.

b.

Touch

 [Save]

.

6.

Touch

 [HTTP/IP Enablement]

, the 

HTTP/IP Enablement

 screen displays.

a.

For 

Protocol

, ensure 

Enable

 is selected. If not, touch

 [Enable]

.

Содержание WORKCENTRE 5755





































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды