Trays
Paper Sizes
Weights
• Width: 98–330.2 mm (3.8–
13 in.)
• Length: 148–488 mm (5.8–
19.2 in.)
Extra Long Sheet (XLS) Feeder
Standard:
• Maximum: SRA3 (320 x
450 mm),
320 x 488 mm (12.6 x 19.2
in.)
• Minimum: A4 (210 x 297
mm), 8.3 x 11.7 in.
52–400 g/m
2
Custom:
• Width: 210–330.2 mm
(8.2–13 in.)
• Length: 210–1200 mm
(8.2–47.2 in.)
* If the press is equipped with a Dual High Capacity XLS Vacuum Feeder, the Tray 5, bypass tray, is installed
on the second HCVF.
High Capacity XLS Vacuum Feeder Tray Capacity
• Tray 5, Bypass Tray: 250 sheets
• HCVF Tray 7 or Dual HCVF Trays 6, 7, and 9: 2100 sheets for each tray
• Extra Long Sheet (XLS) Feeder: 700 sheets
Note:
The values are based on 90 g/m
2
paper.
Paper and Media for High Capacity XLS Vacuum Feeder
Important:
• Loading paper above the maximum fill line can cause paper jams or device malfunctions.
• Position the guides correctly to match the paper size. Incorrectly positioned guides can cause
misfeeds and paper jams.
• When the power is reconnected while the bottom plate of the tray is rising, it is possible that the
plate does not continue to move up. In this case, pull out the tray, ensure that the plate lowers
fully, then push the tray into the machine slowly and firmly.
Note:
When paper sheets are loaded or fed, the tray makes a sound of supplying air. This
sound is caused by the Air Assist function and not an abnormal noise.
Loading Paper in the High Capacity XLS Vacuum Feeder (HCVF) Trays
Important:
If fewer than 100 sheets of paper are loaded, the tray guides apply too much
pressure to the paper, which causes the paper to be skewed. Skewed paper leads to paper jams.
170