a. Open the Tray 5 paper guides wider than the paper so you can easily insert the paper.
b. Hold the center of the paper guides and close them so that they touch the edges of the stack.
c. Gently push the paper stack into Tray 5 until it stops.
2. From the print server, go to
PredictPrint Media Manager > Stock Wizard
.
3. Scan the barcode on the stock, then select
Tray 5
from the Stock Wizard Load screen. To set up
the stock, follow the steps in the Stock Wizard.
Note:
For details on setting up the stock in the Stock Wizard, refer to
.
4. Submit the job file to the print server Hold queue. Send the job using
File > Print
from a PC on the
network, or use the Import function at the print server:
a. On the Fiery print server, click the
Import
shortcut.
b. Click
Add
.
c. Navigate to the file and select it.
d. Click
Hold
.
The job is sent to the Hold queue.
5. Set the Job Properties at the print server:
a. To open the Job Properties, in the Hold area, double-click the job.
b. On the Quick Access tab, set Copies to the number of prints that you want to make.
c. On the Quick Access tab, for Paper size, click
Custom
.
d. Set the Width and Height of the paper, as you did at the press Control Panel.
Note that the terms for the paper dimensions are different on the server:
The width is the measurement in the cross-process direction, and the height is the length of
the paper in the process direction. The process direction is the direction in which the paper
moves in the press.
e. Click
OK
.
f. On the Media tab, set Paper source to
Tray 5 (bypass)
.
g. On the Finishing tab, for Delivery options, select the
OCT
or specific top tray that you want to
use to collect the prints. Output is delivered to the Offset Catch Tray or Top Tray.
6. Click
and monitor the job.
PPrriinnttiinngg SSaaddddllee--ssttiittcchheedd B
Booookklleettss w
wiitthh FFuullll B
Blleeeedd,, TTrriim
mm
meedd EEddggeess,,
aanndd IInnsseerrttiinngg PPrreepprriinntteedd C
Coovveerrss
Important:
The following print job workflow requires you to have an Inserter device, a
Production Ready (PR) Booklet Maker Finisher, a Two-Sided Trimmer, and a SquareFold Trimmer
device.
This workflow produces an appealing look on the printed output by doing the following:
233