Xerox Versant 4100 Скачать руководство пользователя страница 261

Страница: 261 / 445

8. Close the dry ink/toner cover.

If the cover does not close completely, make sure the cartridge is in the lock position and is
installed into the appropriate dry ink/toner location.

Note:

After you replace a dry ink/toner cartridge, the system automatically resets the High

Frequency Service Item (HFSI) usage counter for this CRU to zero (0). Check the

consumables Supplies screen to verify the reset and new status.

Replacing the Dry Ink/Toner Waste Bottle

The dry ink/toner waste bottle collects dry ink/toner that accumulates during the printing process.

Note:

When the waste bottle is full, a message displays on the press touch screen informing

you to exchange the full bottle with an empty one.

1. Ensure that the press is not in operation (not running any jobs).

2. Open the center front door and locate the waste bottle.

3. Grasp the handle of the dry ink/toner waste bottle and slowly pull it halfway out of the press.

Slowly pulling out the bottle prevents any dry ink/toner from spilling.

4. Continue slowly pulling out the bottle until it is removed from the press:

261

Содержание Versant 4100






























































































































































































































































































































































































































































Результаты поиска

Содержание Versant 4100

Отзывы:

Бренды по названию

Популярные бренды

Xerox Versant 4100, Пользовательская документация

Результаты поиска

Содержание Versant 4100

Отзывы:

Бренды по названию

Популярные бренды