10. From the New or Edit Profile Properties window, perform the following:
a.
Select an alignment profile option
Registration
,
Perpendicularity
,
Skew
, or
Magnification
.
b.
Make the desired selections for that option.
Tip:
When adjusting multiple items, adjust the image in the following order:
Registration, Perpendicularity, Skew, and finally Magnification.
11. Select the
Test Print
button.
The Test Print window opens.
12. Select the desired Test Print options, including:
a.
The desired paper tray
b.
Print quantity
It is recommended that you select a quantity of 10 test prints in order to best evaluate the
printed output.
c.
Choose the desired test print; options include:
Grid 90 - Front & Back
,
Grid 90 - 204
, and
PH-
REGI
d.
Long Edge Feed or Short Edge Feed
13. If using the
Grid 90 - Front & Back
Test Print, select the desired Front and Back Print Density
Levels.
The Front and Back Print Density Levels are available only with the
Grid 90 - Front & Back
Test
Print. This is the default test print that the Alignment feature uses.
14. Select
Start
.
A message displays stating that the test print is in progress.
15. Retrieve your printed output.
Discard the first few prints as inconsistency tends to be greater with these first images.
129