4. From the Advanced Stock Setup window, select the various options as required.
For information, refer to
Advanced Stock Setup options include the following:
• Stock By Name Only
• Multifeed Detection
• Tray Air Assist
• Enable Tray Heater
• Aligner Roll Pressure
• Regi-Loop
• Pre Gate Roll Adjustment
• Primary Transfer Current Adjustment
• Secondary Transfer Voltage Adjustment
For more information, refer to
Secondary Transfer Voltage Adjustment
• Transfer output adjustment for trail edge
• Adjustment of Paper Speed at Transfer
• Fuser Temperature Adjustment
• Fuser Speed Adjustment
• Alignment Profile
For detailed information and instructions, refer to
.
• Fold Adjustment Profile
For detailed information and instructions, refer to
.
• Paper Curl Correction
For detailed information and instructions, refer to
.
5. Run test prints to ensure that the selected options provide the desired output.
For information, refer to
Using the Test Print Option from Advanced Stock Setup
• If the test prints are acceptable, continue to the next step.
• If the test prints are not acceptable, repeat the previous steps and run more test prints until
the desired printed output is achieved. If the output continues to be unacceptable after
multiple sets of test prints, contact your Customer Support Center for further assistance.
6. To save selections and close the Advanced Stock Setup window, select
OK
.
7. To save and close the Stock Properties window, select
OK
.
Secondary Transfer Voltage Adjustment
Use the
Secondary Transfer Voltage Adjustment
option to correct for mottle (uneven toner
coverage) and color shift (inconsistent color). These image quality issues can occur on heavy-weight
stocks. The
Secondary Transfer Voltage Adjustment
option creates and saves an image transfer
adjustment to the Bias Transfer Roll in the press. The Bias Transfer Roll is where the image is
transferred from the belt to the paper.
113
