5. Select
Start
.
An Information window displays stating
Test Print in Progress
.
Upon completion of the test prints, the Information window closes.
6. Retrieve the test prints from the output area of the printer.
7. Review the output.
• If the sample output is acceptable, go the next step.
• If the sample output is not acceptable, repeat the previous steps until acceptable output is
accomplished. If the output remains unacceptable after multiple trials, contact your Customer
Support Center for further assistance.
8. Select
OK
to save and close the Stock Properties window.
9. Select
Close
to exit the Stock Library feature or Tray Properties.
Using the Test Print Option from Advanced Stock Setup
1. Perform one of the following:
• Copy an existing stock entry. Refer to
.
• Modify or edit an existing stock entry. Refer to
Editing an Existing Stock in the Stock Library
.
2. From the Stock Properties window, select and modify the stock attributes as required, including
entering a new or revised stock name, selecting a stock size, color, and other attributes.
3. Select the
Advanced Setup
button.
The Advanced Stock Setup window opens.
4. Select the
Test Print
button.
The test print window opens.
5. Select the desired Test Print options, including:
• Tray:
• Quantity: It is recommended that you select a quantity of 10 test prints in order to best
evaluate the printed output.
• Sides Imaged:
• 1 Sided-Face Up
• 1 Sided-Face Down
• 2 Sided
• Long Edge Feed or Short Edge Feed:
• Color Mode:
•
Black
: Select this for black and white only output
•
CMYK
: Select this for color output
6. Select
Start
.
An Information window displays stating
Test Print in Progress
.
Upon completion of the test prints, the Information window closes.
7. Retrieve the test prints from the output area of the press.
105
