Xerox Versant 4100 Скачать руководство пользователя

Страница: 100 / 445

2. Click

Create New Stock

The New Stock Setup window appears.

3. Type a new stock name and modify the attributes as required.

4. Click

Advanced Setup

. The Advanced Stock Setup window appears.

Select the various Advanced Stock Setup options as required. Refer to

Advanced Stock Setup

Options

To save the changes, click

, then close the Advanced Stock Setup window.

5. The stock is either a temporary stock or a permanent stock in the Stock Library:

• To make the stock a temporary stock, ensure that the Save In Stock Library check box is not

selected.

• To permanently save the stock to the Stock Library, ensure that the Save In Stock Library

check box is selected.

6. To save and close the New Stock Setup window, click

7. To close the Tray Stock Properties window, click

again.

The new stock is displayed in the Stock Library list of PredictPrint Media Manager.

Note:

Before you run the job, ensure that the tray is loaded with the same stock as

programmed for that tray in the Stock Library.

Editing an Existing Stock in the Stock Library

1. From the PredictPrint Media Manager main window, click

Stock Library

The Stock Library window appears.

2. Select the required stock from the Stock Library list.

3. Click the

Edit

icon.

The Stock Properties window appears.

4. Modify the stock attributes as required.

5. Click

Advanced Setup

Select the various Advanced Stock Setup options as required. Refer to

Advanced Stock Setup

Options

To save the changes, click

, then close the Advanced Stock Setup window.

6. To save and close the Stock Properties window, click

The Last Updated column in the Stock Library list displays a new date and time, which indicates
when the changes were made.

Removing a Stock from the Stock Library

1. From the PredictPrint Media Manager main window, click

Stock Library

The Stock Library window appears.

2. Click the

Remove

icon.

A prompt appears with the message

Are you sure you want to Delete this stock?

3. To delete the stock from the Stock Library list, click

Yes

100

Содержание Versant 4100






























































































































































































































































































































































































































































Результаты поиска

Содержание Versant 4100

Отзывы:

Похожие инструкции для Versant 4100

Бренды по названию

Популярные бренды

Xerox Versant 4100, Пользовательская документация

Результаты поиска

Содержание Versant 4100

Отзывы:

Похожие инструкции для Versant 4100

Бренды по названию

Популярные бренды