5. Load the remaining sheets into the tray, then align the paper edges in the direction shown (1). To
adjust the paper guides, press in the guide release lever and move the guides carefully until they
touch lightly the edges of the paper (2).
6. Gently push the tray into the press until it stops.
Special Media
Hole-Punched Paper
For hole-punched paper, place the paper with the holes to the right when you face the front side of
the High Capacity Vacuum Feeder (HCVF).
Precut Tabs
For precut tabs, place the paper with the tabs to the left when you face the front side of the HCVF.
After you load the paper, install the appropriate tab guide on the end guide, at the short edge of the
paper.
Note:
Ensure that the tabs of the precut tab fit the notch of the tab guides.
172