Important:
For most print jobs, these levers should remain in their default position. The
position of these levers should be changed only if there is a skew problem when running a
specific print job or media type. Changing the levers may cause more skew problems when
running certain media types such as coated, label, tab stock, hole-punched paper, transparency,
film, postcards, and envelopes.
The paper-feed adjustment levers are found in Trays 8 and 9. These levers are used to improve paper
feed accuracy and to reduce paper skew problems.
1. Rear Paper-feed Adjustment Lever
2. Right-side Paper-feed Adjustment Lever
Improving Paper Feed Performance in Trays 8 and 9
1. Slowly pull the tray out until it stops to open it.
2. Ensure that the desired paper is loaded into the tray.
3. Go to the
PredictPrint Media Manager
on the print server.
a.
From the Tray Properties window, verify the correct paper information including size, type,
weight, and paper curl or alignment option for the tray.
b.
Select
OK
and close the Tray Properties window.
155