A Z-Fold has two folds that are folded in opposite directions, resulting in a type of fan fold. Z-Fold
output is delivered to the C/Z Folder Output Tray.
Z-Fold Half Sheet
As with a regular Z-Fold, the Z-Fold Half Sheet has two folds that are folded in the opposite
directions. The difference between a regular Z-Fold and a Z-Fold Half Sheet is that the half sheet is
not folded in two equal folds. The two folds are unequal which allows one edge of the Z-Fold Half
Sheet to have a longer edge. The longer edge allows for stapling or hole punching. Z-Fold Half
Sheet output is delivered to the C/Z Folder Output Tray.
If the press is equipped with the optional Crease and Two-Sided Trimmer device, extra fold and
crease types are available. For information, refer to
Optional Trimming with Fold and Crease Adjustment Profiles
The
Trim
and
Crease
selections are available only when the press is connected to the following
optional devices:
• Production Ready Booklet Maker Finisher
• Crease and Two-Sided Trimmer
Tip:
For the Crease and Two-Sided Trimmer device, the trim selection is different from the
trimming that occurs with the SquareFold
®
Trimmer module. For more information, refer to the
.
Crease and Trim Options
The
Crease
and
Trim
options are only available with the following Fold options:
• Bi-Fold Single Sheet
• Bi-Fold Multiple Sheet
• Bi-Fold Multiple Sheets Stapled
Trim Selection
The optional
Trim
selection cuts the top and bottom of the media as it passes through the optional
trimmer module. The trimmed media is sent to the optional Production Ready Booklet Maker Finisher
for bi-folding.
133