S P E C I F I C A T I O N S
L1025 V-1 6/01
SAFETY FIRST!
Please read, observe and follow the safety precautions found in the LaBounty
Safety, Operation & Maintenance Manual shipped with your attachment.
(1) EXCAVATOR WEIGHT
(1) EXCAVATOR WEIGHT
(2) ATTACHMENT
SHEAR
SHEAR
(3)
MODEL
APPROX 2nd Member
APPROX 3rd Member
WEIGHT APPROX
OPENING
DEPTH
REACH
(lbs)
(m tons)
(lbs)
(m tons)
(lbs)
(kg)
(in)
(mm)
(in)
(mm)
(ft-in)
(m)
MSD 7
6,000
3
12,000
5
950
431
10
254
11
279
4’ - 7”
1.4
MSD 7R
7,500
3
15,000
7
1,100
499
10
254
11
279
5’ - 0”
1.5
MSD Shears
MSD7 / MSD7R
(1) Excavator weight recommendation is based on standard excavator weights and boom and/or arm lengths. All applications must be approved by Stanley LaBounty prior to sale.
(2) Attachment weight can vary depending upon mounting bracket, appropriate cylinder required to maximize base machine operating pressures, and any options installed on the shear.
(3) Typical reach of bottom and back bracket is listed. Reach can vary depending upon the bracket needed for the base machine. Total reach may be substantially increased by mounting the attachment to the stick and bucket
linkage of a large base machine. Stanley LaBounty sales staff are available to assist in reach/base machine sizing.
NOTE: Weights, dimensions and operating specifications listed on this sheet are subject to change without notice. Where specifications are critical to your application, please consult Stanley LaBounty.
L a B o u n t y M S D 7 a n d M S D 7 R
(R indicates rotating model) Mobile Shears
are ideal for ferrous and non-ferrous
scrap applications. The MSD7/MSD7R
will easily H- and I-beams, plate, rebar,
pipe, round stock, wire and concrete.
The primary applications for the MSD7
and MSD7R include both ferrous, and
non-ferrous scrap yards and demolition
applications where maneuvering into
tight areas is required.
MSD Mobile Shears Feature
four-way
indexible blades, replaceable wear parts
for easy maintenance, and a patented de-
sign offering maximum cutting strength
and reach with minimal weight. MSD Ro-
tating Mobile Shears feature 360° con-
tinuous rotation and a severe-duty turn-
table bearing.
Built to Last,
LaBounty Mobile Shears
are manufactured in the U.S.A. using
abrasion-resistant, high-strength alloy
steel for minium weight and maximum
durability and reach.
MSD7R Mobile Shear Components
(with skid-steer bracket shown)
HEAVY-DUTY
PIVOT GROUP
SEVERE-DUTY
TURNTABLE BEARING
STATIONARY
LOWER JAW
FOUR-WAY INDEXABLE
(4) CUTTING BLADES
MOVABLE
UPPER JAW
