•
•
Checking the Status of Finisher Consumables
•
Replacing the Basic Staple Cartridge (for Side Stitching)
•
Replacing the Finisher Staple Waste Container
•
Emptying the Hole Punch Waste Container
SquareFold
®
®
Trimmer Maintenance
Emptying the SquareFold
®
®
Trimmer Waste Container
When the waste container reaches the full condition, an indicator lights on the top of the
SquareFold
®
Trimmer device. A message also appears on the press indicating that it is full. When the
message appears, dispose of the paper scraps.
Note:
Keep the press powered on when disposing of the waste. If powered off, the press does
not recognize that the container was emptied.
Perform the following steps to empty the trimmer waste container.
1. Ensure that the press is not running, then slowly pull out the
Trimmer Waste Container
.
292