XCMG XE17U, Инструкция по эксплуатации

Страница: 97 / 208

09.2020 Seite 87 / 197
5.2 Start and Shutdown
Warning! Keep combustible materials like tree leaves, paper, etc. off the high-
temperature components such as the muffler to prevent fire.
Keep in mind that any leakage of fuel, lubricant or hydraulic oil may also
cause a fire.
Prevent big damage and/or serious injuries.
Notice Before starting the engine, check the following items:
– The wiring: check and repair/replace any damaged/loose wires or
missing/damaged terminals.
– The fuel machine: drain out or remove any water or other foreign materials
from the fuel tank and the water separator.
– Hydraulic machine: Check hydraulic oil for leakage, pipes for damages, and
components for interference.
– Lubrication: Perform routine service and maintenance thouroughly and
regularly; according to the timer’s reading.
– Liquid level: Check the hydraulic oil level, the coolant level in engine radiator,
and the engine oil for their intended level.
In case of abnormalities, refill or drain until it reach the intended height.
– Safety of surroundings: Check the machine’s vicinity.
– Make sure nobody is located in any blind spot or is performing
maintenance/repairs before ignition.
– After start: Check all control levers and indicators for unusual stiffness or
values.
– Before work, shut off the engine again to service the abnormal functional
units.
Warning! Operation inspection before start
When leaving the seat, set the safety rod to locked position to avoid
accidents caused by moving any control advertently. Proceed in the
following order:
1. Set the safety rod to “locked” position.
2. Check if working conditions and other situations are normal.
3. Make sure that the travel control levers and the control lever are in
their neutral position.
Notice : When starting the engine, do not to touch any other control or
switch.
4. Turn the engine starter switch to “I” position and check if all indicator
lights are turned on.
5. After 2 seconds, make sure the following lights are still on.

Engine coolant temperature gauge

Charging alarm light

Fuel gauge

Engine oil pressure alarm light
Engine Start
Warning! Follow the steps in the designated order.
lock