manualshive.com logo in svg

XCMG XE17U, Инструкция по эксплуатации

Поделиться
Скачать
XCMG XE17U Скачать руководство пользователя страница 25

 

 

09.2020 

Seite 15 / 197

 

- Wipe any spilled diesel fuel off the machine 
- Neutralise spillages on the ground with bonding agents  
- Do not clean the machine with flammable fluids. 
- Do not store any cleaning cloths in the engine compartment and remove flammable  
  residues, e.g. oil spills, coal dust and paper residues. 

 Only fuel up the machine in a well-ventilated place or ensure fresh air supply

,  

- Make sure that there is good metallic contact between the pump nozzle and the filler neck  
  during refueling.  
- If possible, ground the machine at the fuelling station while it is being refuelled.  

 

No open fire when handling flammable materials.

 

 

First Aid Measures

  

– 

Protection/personal safety

  

    • Identify - what kind of emergency? 
    • Think - what dangers are there for the injured or helper? 
    • Act - make the situation safe.  

– 

Emergency call

  

– 

Emergency life-saving measures

  

    • Recovery position  
    • Cardiac massage, artificial respiration and defibrillation  
    • Staunch bleeding, shock prevention  

– 

Additional first aid 

 
Explosion Hazards 

  Before refueling or filling with hydraulic fluid, shut off the machine and secure against unintentional 

restart. 

 

  When refueling via a tank supply line, make electrical compensation between the machine and the 

refueling machine. 

 

  Immediately wipe spilled fuel off the machine with a suitable cloth. 

 

  Immediately bind spilled fuel to substrate with binder. 

 

  Dispose of used binder safely and in an environmentally friendly manner. 

 

  Do not use booster sprays containing ether-solvents to start the engine. 

 

  Do not store or use flammable liquids near the machine. 

 

  Do not use flammable cleaning agents to clean the machine. 

 

  Do not place flammable materials such as rags or clothing near the engine. 

 

  Do not bring a lighter or matches in the cabin, as it/they may explode in case of rise of temperature 

 

 

Содержание XE17U

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды