XCMG XE17U, Инструкция по эксплуатации

Страница: 96 / 208

09.2020 Seite 86 / 197
5 Operation
Notice Operating Rules - Operating Instructions for new machines and machine scope
Altitude: below 2000m above sea level
Ambient Temperature: -15 to +40
Job Object: 3 or less grade soil level and loose materials
Soil conditions Ideally solid and flat. slopes up to 15° upwards are ok
Working environnement: Non-swampy
– All excavators must be inspected and adjusted before delivery by the manufacturer
or his authorised representative.
– The following steps must be followed during initial start-up process and/or the
running-in period.
– Ignoring them may damage the machines or produce other negative impacts on
their performance.
5.1 Follow the rules regarding operating hours
Time Load
First 50h Maintain 60%-70% of full load (engine speed: 60%-70% of rated speed)
After 50h Full load
Caution! Advice for a safe running-in period
– Avoid working at full load within the running-in period (first 50h of service)

It will affect the lifetime and safe operation of the machine, eventually leading to
accidents!
– Check the coolant, fuel, engine oil and hydraulic oil every day for leakage.
– Check the lubricating liquids every day and refill them if needed.
– During operation, always observe the information and indicatiors given on the
display and the various meters.
– Avoid engine overload.
– Keep below 80% of the maximum load until the engine and other components
have reached the standard working temperature.
During operation, keep watching over proper function of the machine.
– Check for looseness, wear or damage caused during delivery.
– Check the wires and terminals for looseness, the meters for abnormal values,
and the battery’s electrolytes for concentration.
– Check the lubricating liquids and filter elements for contamination, dirt or
damages.
Notice – When changing the lubricant or grease, refer to the “Maintenance” section of
this instruction for use.