XCMG XE17U Скачать руководство пользователя | Manualshive

Страница: 29 / 208

background image

09.2020

Seite 19 / 197

Chemical

Burns

Warning

Contact with corrosive and chemical consumables

!

Acids and bases cause chemical burns to skin and tissue, and blindness if they
come in contact with the eyes.
Acids and bases will damage clothing.



Observe handling-specific and situation-specific safety notes.



Observe the following safety notes

:

- Replace damaged battery immediately.
- Wear safety goggles and protective gloves when replacing battery.
- Wear safety goggles and protective gloves when working on the battery.
- Do not smoke near the battery.
- Ensure that there are no open flames or sources of ignition
(e.g. electrical equipment) near the battery.
- Do not short connect the battery terminals.
- Do not place conductive materials on the battery.
- Replace discharged battery immediately or charge battery in heated area



Examples of chemical burns:

-

Chemical burns from handling acidic consumables.

- Chemical burns from leaking battery acid.

First Aid Measures

1.

Protection/personal safety

  • Identify - what kind of emergency?
  • Think - what dangers are there for the injured or helper?
  • Act - make the situation safe.

2.

Emergency call

3.

Emergency life-saving measures

  • Recovery position
  • Cardiac massage, artificial respiration and defibrillation
  • Staunch bleeding, shock prevention

Additional first aid

The Danger of Asbestos Dust

Warning

Contact with the asbestos dust

!

If too much asbestos dust in the air is breathed, it is possible to suffer a lung cancer.



Observe handling-specific and situation-specific safety notes.



Observe the following safety notes

:

- Use the dust filtering masks,when there is asbestos dust in the air
- Follow the rules, regulations and the environment standard in the work place.
- Do not be allowed to close to the machine for other personnel during operation.
- Operate the machine in the upwind position If there is asbestos dust in the air.
-Do not use the compressed air to reduce the dust.

First Aid Measures

1.

Protection/personal safety

  • Identify - what kind of emergency?
  • Think - what dangers are there for the injured or helper?
  • Act - make the situation safe.

2.

Emergency call

3.

Emergency life-saving measures

  • Recovery position
  • Cardiac massage, artificial respiration and defibrillation
  • Staunch bleeding, shock prevention

Additional first aid

Poisoning and suffocation

Warning

«
...
27
28
29
30
31
...
»

Содержание XE17U

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XE17U

Бренд: jcb Страницы: 6

Бренд: jcb Страницы: 4

Бренд: IHI Страницы: 110

Бренд: STC Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды