XCMG XE17U Скачать руководство пользователя

Страница: 164 / 208

09.2020

Seite 154 / 197

– Determine that the drain plug and air drain plug of water separator are

tightened.

If the air bleed plug is not tightened, the air in fuel system won’t be
exhausted.

– Ensure the fuel ball valve in the bottom of fuel tank has been opened.

– Loosen the air bleed plug on the fuel filter.

– Loosen the hand wheel on fuel supply pump and move the plunger up

and down until no air bubbles are seen from the air bleed plug.

– Tighten the air bleed plug and continue to move the plunger of fuel

supply pump up and down until the load becomes heavier.

– Push down the hand wheel of fuel supply pump and tighten it.

Start the engine and run it at low speed

and empty load.

– Hang “No Operation” nameplate to the operating lever.

– Pull the safety locking rod to Lock position.

– Check the hydraulic system for leaks.

Содержание XE17U

















































































































































































































Результаты поиска

Содержание XE17U

Отзывы:

Похожие инструкции для XE17U

Бренды по названию

Популярные бренды

XCMG XE17U, Инструкция по эксплуатации

Результаты поиска

Содержание XE17U

Отзывы:

Похожие инструкции для XE17U

Бренды по названию

Популярные бренды