XCMG XE17U, Инструкция по эксплуатации

Страница: 15 / 208

09.2020 Seite 5 / 197
– All safety instructions in this instruction for use must be observed during use
– All valid national and international safety regulations to be observed
– Only the operating materials listed in the instruction for use must be used
– All persons involved in the machine’s operation must follow the safety instructions according to the
instruction for use.
– All persons involved in the machine’s operation must comply with their respective responsibilities
according to the instruction for use.
– The technical information values and their limits must be taken into account.
– The Load charts and operating capacities must be respected.
– The machine must be operated only by using additional/interchangeable equipment that was
approved by the manufacturer.
– The corresponding machine model and maximum loads must be taken into account
Special Modes of Operation
Special modes of operation:
– become the machine operator’s sole responsibility, if they do not comply with the “intended use”
defined by manufacturer
– may significantly reduce the machine’s service lifespan
– may result in excessive stress on the machine, causing premature wearoff
– may result in undefined loading conditions with high dynamic stress, which may also lead to
premature wearoff or damages
Special modes of operation include:
– Vibrator mode, hammer mode or quick coupler mode
– Vibrator lances/probes
– Installation of interchangeable equipment
– The use on floating constructions
1.5 Limits of Application
Defining the machine’s limits of application is
also required in the designated documentation
parts in compliance with the DIN EN ISO 12100 standard and the Machinery Directive (2006/42/EG)
Limitation factors of intended use
– Range of applications in accordance to the operator’s experience with and knowledge of the
machine (industry, commerce, private, public sector)
– Intended use (refer to specifications in the instruction for use)