09.2020
Seite 122 / 197
Warning
–
Operation
in Special Conditions
Warning!
Operating in Special environemental Conditions
Operations in extremely cold conditions
–
If the excavator works in extremely cold days, protective measures
must be taken to ensure normal operation.
–
The following detailed inspection can ensure normal operation of
the excavator at extremely low temperature.
o
Check if correct antifreeze is added in the cooling system at
extremely low temperature. Check the cooling system
carefully and record status of leakage.
o
Keep the battery fully charged to prevent freezing.
o
Maintain the engine at optimum so that it is easy to start and
operate the engine even at extremely low temperature.
o
Select engine oil of proper specification according to
temperature. Refer to “Lubrication and Specifications” in
engine manual for details.
o
Before operation, drain condensate in the fuel tank and water
separator, then refill.
o
Take out and service the fuel filter element, drain concretions
(e.g. wax), and ensure that the solid point of the fuel used is
lower than the lowest ambient temperature.
o
Lubricate the excavator fully according to “Lubricants and
Maintenance Schedule” or the lubrication diagram on the
machine.
o
Start the engine to warm it up to normal temperature before
load-on operation.
o
When the excavator is under idle speed, if dirt and ice are
frozen on travel motor gears, heat up to thaw the frozen
substances before excavator operation attempt.
o
Operate the hydraulic units with care until the temperature that
normal operation requires is reached.
o
Check all machine control units and their functions to ensure
normal working.
o
In cold days, see the items concerning start in cold days in
“Engine Start” in this manual if assisted start is unavoidable.
o
To prevent ice coating. Clean up all dirt, snow and water.
When possible, cover the machine with canvas and prevent
edge of the canvas from being frozen on ground.
Содержание XE17U
Страница 74: ...09 2020 Seite 64 197 4 6 Hydraulic Schematic Diagram ...
Страница 75: ...09 2020 Seite 65 197 4 7 Electrical Schematic Diagram 4 8 Part identification and name plates Notice ...
Страница 78: ...09 2020 Seite 68 197 Arm Bucket Boom top No _____________________ Bucket No _____________________ ...