XCMG XE17U, Инструкция по эксплуатации

Страница: 143 / 208

09.2020 Seite 133 / 197
– If the hose leaks, it may cause fire or faulty operation, resulting in
serious injury or damage.
o
If the bolt looseness is found, stop operations and fasten the bolts to
the specified tightening torque. If there is any damage to the hose,
stop the operation immediately, and contact with the dealer of
XCMG.
– If there is any of the following problems, replace the hose:
o
Damage or leakage of hydraulic pipe connection.
o
Cladding frayed or disconnected, and or strengthening layer wire
exposed.
o
Cladding expands in some places.
o
Movable parts distorted or crushed.
o
Impurities inside cladding.
Waste
To prevent pollution, attention should be paid to the treatment of waste:
– Discharge the oil from the machine into the container; do not discharge
it directly to the ground, or into the sewers, rivers, oceans or lakes.
When dealing with hazardous materials, such as engine oil, fuel oil,
cooling fluid, solvents, filter and batteries, it is necessary to comply with
the laws and regulations.
– According to the requirements of laws and regulations, the whole
machine, parts and accessories that need to be disposed of must be
properly handled in accordance with laws and regulations.
Air Conditioner Maintenance
– If the air conditioner refrigerant gets into the eyes, it may cause
blindness; if the refrigerant comes into contact with skin, it can cause
frostbite.
Compressed air
– When cleaning with compressed air, it may be caused by flying particles
causing personal injury or machine damage.
– When using compressed air to clean the filter element or radiator, wear
goggles, dust masks, gloves and other protective equipment.
Notice! Periodic Replacement of Safety-critical Parts
– For long-term safety of in operation of the machine, there is need for
regular lubrication and maintenance. To further enhance security, the
safety-related parts such as hoses, seat belts should be periodically
replaced.
– When exceeds the allotted time, the material of parts will naturally
change. Reuse will cause deterioration, wear and damage. Finally,
these parts may break down and cause serious injury or damage.
During the operation, it is difficult to judge how long these parts can
keep working according to an external inspection or touch, so replace it
regularly
– If there are any defects in safety-critical parts, replace or repair it even it
has not reached the allotted time.