XCMG XE17U Скачать руководство пользователя

Страница: 56 / 208

09.2020

Seite 46 / 197

Warning!

Safety rules for object lifting

When lifting objects:

Do not lift objects on slopes, soft ground or other places where

the machine may become unstable.

Make sure the used wire ropes meet the required standards.

Keep focused at any time during lifting jobs. Stop the process

instantly if you feel the machine is about to tip over.

To avoid collisions, watch out your surroundings carefully

before rotating or turning the machine while lifting objects.

To avoid object oscillation, never make sudden movements

with the machine.

Do not lift objects from the side or towards the machine.

Never leave the seat/machine while objects are lifted. Always

put them back on the ground first.

Lifting objects is not part of intended use for this machine. Do it

on your own responsibility

Содержание XE17U

















































































































































































































Результаты поиска

Содержание XE17U

Отзывы:

Похожие инструкции для XE17U

Бренды по названию

Популярные бренды

XCMG XE17U, Инструкция по эксплуатации

Результаты поиска

Содержание XE17U

Отзывы:

Похожие инструкции для XE17U

Бренды по названию

Популярные бренды