XCMG XE17U, Инструкция по эксплуатации

Страница: 111 / 208

09.2020 Seite 101 / 197
Notice! Operating the auxiliary ports
– The proportional control enables you to smoothly control the implement speed.
Example: If you press the rocker switch halfway to the left, the implement
moves at approximately half speed.
– The “1-way” is used for hammering attachments, such as a hydraulic hammer.
– The “2-way” is used for rotating attachments, such as a rotary gripper, an
auger, etc.
– The auxiliary port pedal (1) can be protected against unintentional operating by
turning the locking flap (2). If the auxiliary port pedal is not used, the locking
flap must be folded in.
o
When operating the right pedal part (figure) there is an oil flow at the
connector B (figure below).
o
When operating the left pedal part (figure) there is an oil flow at the
connector A (figure below).
1
2
Left
Right
Left
Right
Right
A B
Left