XCMG XE17U, Инструкция по эксплуатации

Страница: 86 / 208

09.2020 Seite 76 / 197
13
）
Preheating indicator(s)
– When the ambient temperature is low (below 0
℃
)
, the engine ECU automatically
controls the preheating of the engine, and a indicator will appear in the display.
14) Battery (charge) fault code
– The monitor shows A501 if:
o
The generator does not charge the battery.
o
The monitor display fails to indicate the charging.
o
Check both of them, and have them repaired if necessary.
15) Display monitor
– Shows all important status information of the excavator
– Also shows all abnormalities and the related warnings indicating their occurance
– The indicators on the display also light up or flash when abnormalities happen
16
）
Fuel stock indicator
– When the fuel level is less than 10%, the indicator on the display flash and the
fault code “A302” starts to flash at the same time.
17) Coolant temperature indicator
– When the coolant tempereture is more than 105
℃
, the indicator on the display
flash and the fault code “A301” appear in the fault code area.
18) Aux mode indicator
– The indicator lights up according to the mode of the auxiliary implement.
19) Spare power
– The spare power supply used the cigarette lighter in the cabin.
– Confirm whether the device’s operating voltage matches the machine voltage
before use.
– Using this device with excessive power may cause the fuse to blow.
– Unplug the device to overhaul the fuse in case of a function failure.
20) CAN fault code
– When the fault code “E4030” appear in the fault code area, the CANbus faults and
contact the skilled personel immediately.
A501
A302
A301
A4030