XCMG XE17U, Инструкция по эксплуатации

Страница: 144 / 208

09.2020 Seite 134 / 197
6.3 Installation for the accessories and other safety instructions
Notice! Installation for the accessories and other safety instructions
– When installing the optional parts or accessories, please contact the
XCMG distributor in advance. Any injury, accident or product fault
caused by using the accessories or parts without approval from
XCMG . will be unrelated with this company.
– When installing and using the accessories, combine the operating
accessories according to the operation and maintenance manual
about the accessories and the general instruction about the
accessories in this manual.
– Due to the different types or combinations for the equipment, there
is the risk that the equipment collides with the driver’ cab or other
parts of the machine. Before using the unfamiliar equipment, check
whether there is the risk to influence each other and operate it
carefully.
I
TOPS, FORS/ROPS
– The different types of guards are used to protect the operator.
– The machine and the machine application determine the type of
guard that should be used.
– The ROPS/FOPS Structure (if equipped) on your machine is
specifically designed, tested and certified for that machine (in
accordance with the standard ISO 10262:1998, ISO 12117-2:2008).
– TOPS (Tip-Over Protection Structure) is another type of guard that
is used on compact excavators(in accordance with the standard ISO
12117:1997)
– A danger will occur when some falling stones or flying objects crash
onto the cab on the construction site.
– Please choose the protection device which is suitable for the
operation condition to protect the driver.
– When working on a mine, tunnel, dell or mellow and humid surfaces,
you may be in the danger caused by falling stones or flying objects.
So it is very necessary to install protection devices on the cab which
shall meet the requirements on FOPS (Falling Object Protective
Structure) or window protection devices.
– It is forbidden to reform or change the protection structures of any
type by strengthening devices, such as drilling, welding, or resetting
the fasteners. All of the protection system which suffers severe
impact or damage shall be reappraised. If necessary, re-install, re-
certify or replace the system.
– Purchase necessary optional devices without any statement. The
machine of standard cab is not equipped with ROPS/FOPS. If it is
necessary, please explain the situation to the agent or contact
XCMG. and use the device according to the right installation and
application range.
– The cab which is equipped with FOPS/ROPS devices cannot be
dismantled at will, and the cab without protection devices will lose its
protection function. If any plastic deformation or breakage appears
in any part of the protection structure (e.g., it is affected by rolling,
falling object or dumping), please contact the agent and let the
authorized professionals replace the protection structure.
Brief description on replacing FOPS/ROPS: