XCMG XE17U, Инструкция по эксплуатации

Страница: 200 / 208

09.2020 Seite 190 / 197
9.3 Load suspension device
Notice!
– A load suspension device with all the characteristics listed below is required.
– The system must withstand a load two-and-a-half times its rated lifting load,
regardless of the point at which that load is applied.
– The system must be designed in such a way as to practically prevent any
objects that have been lifted from falling from the lifting arrachment, for
example by means of a protective attachment designed for this purpose.
– The system must not allow the lifting attachment to slip from the attachment
being lifted.
– Do not lift loads that exceed the values indicated in the lifting capacity
tables.
– Always observe the maximum permissible lifting capacity of the hoisting
gear. Lifting loads over the maximum permissible lifting capacity is not
allowed.
– The values indicated in the tables only apply to level and hard grouds. When
working on soft ground, the machine can tip over easily, as the load is
concentrated on one side only and the crawler or the dozer can dig into the
ground.
– The values indicated in the tables only apply for loads without a bucket. If a
bucket is used, the weight of the bucket must be subtracted from the values
in the tables. The weight of mounted accessories must be subtracted from
the lifting capacity.
– During lifting operations, the boom may bot be swiveled to the left or right.
The machine could tilt. In order to avoid inadvertent actuation, lower the
locking flop for the boom swing pedal.
– During lifting operation,driving/moving the crawler chassis is not permitted.
– Use utmost care to avoid any risk of tipping, slipping, or other potentail risks
implied when lifting loads.
– The operator must pick up the load at the centre, avoid sudden movements,
and make sure the load does not swing.