XCMG XE17U Скачать руководство пользователя страница 51

Страница: 51 / 208

09.2020

Seite 41 / 197

During machine operation

Warning! Safety

Rules:

Before moving, orient the upper structure so that the carrier

roller is located to the rear of the cabin.

If the carrier roller is in front of the cabin, the steering axis and

directions will be reversed

(e.g.: going forward will result in moving backward and turning

left will actually turn right. This only applies for the crawler
tracks’ controls, not the upper half of the machine).

Before moving, make sure again that there is no person or

obstacle in the surrounding area.

Before moving, sound the horn to alert other people working in

the nearby area.

Only operate the machine when seated with the safety belt

fastened

No one is allowed to sit on the machine besides the driver.

Ensure that the door or the window of the cabin is locked.

Always operate the machine according to the above precaution

measures.

When the machine turns or swings, there should be a signalman

at the rear of the machine.

Take extra care not to touch other machines or people.

Содержание XE17U

















































































































































































































Результаты поиска

Содержание XE17U

Отзывы:

Бренды по названию

Популярные бренды

XCMG XE17U, Инструкция по эксплуатации

Результаты поиска

Содержание XE17U

Отзывы:

Бренды по названию

Популярные бренды