X-Rite COLOREYE XTH, Руководство по эксплуатации

Страница: 30 / 64

SETUP
2-10
Note: If dd/mm/yyyy is chosen, the values will be separated by a period rather
than a slash. For example, 21/04/1999 indicates April 21st, 1999.
6. Set the date. Move the cursor using the left and right arrow keys on the keypad to
the date field. To increase the number at the cursor, press the Enter key. You will
scroll through the values 0 through 9.
7. Set the time. Move the cursor using the left and right arrow keys on the keypad to
the time field. To increase the number at the cursor, press the Enter key. You will
scroll through the values 0 through 9.
Note: The time is set using a 24 hour clock. For example, 2:30 P.M. would be
entered as 14:30.
8. Save the new time and date by moving the cursor to the [save] at the bottom of the
screen. When the [save] (lowercase) changes to [SAVE] (uppercase), press
Enter . The date and time settings have been saved.
Choosing Hardware Settings
1. Select OPTIONS from the ColorEye XTH Main Menu .
2. Select SETTINGS from the Options Menu .
3. Select HARDWARE SETUP from the Settings Menu .
4. The Hardware Setup Screen is shown below:
5. To change an item in the Hardware Setup list:
a. Move the cursor to the desired item using the left or right arrow keys.
b. Press
Enter to scroll through the available values for each item.
6. Repeat step 5 for all the items you need to choose in the Hardware Setup.
7. Save the new Hardware Setup by moving the cursor to the
[save] at the bottom of
the screen. When the [save] (lowercase) changes to [SAVE] (uppercase), press
Enter . The new Hardware setup is saved.
Options on the Hardware Menu
The Hardware Menu is used for choosing instrument dependent options: Baud Rate and
Sleep Delay.
Baud Rate: You need to choose the baud rate for your computer. Possible values are
2400, 4800, 9600, 19200, 38400 .
Sleep Delay: Possible values are 2 mins, 5 mins, 10 mins, 20 mins, 60 mins . The
sleep delay specifies how much time will elapse if no keys have been pressed before
the instrument is put into a power saver sleep mode. For more information, refer to
“Understanding the Three Power Modes” on page 1-12.
Time Backup: This option prompts an automatic backup of all data (measurements
and settings) stored in RAM (volatile memory) at a specific time interval. Possible
values are 1 min, 2 mins, 5 mins, 10 mins, 20 mins, 60 mins and OFF . The default
value is 10 mins. For example, an automatic data backup is performed every 10
SETUP HW:
BAUD RATE 38400
SLEEP DELAY 5 MIN
TIME BACKUP 10 MIN
MSMNT BACKUP 50
[save]
>