X-Rite COLOREYE XTH, Руководство по эксплуатации

Страница: 22 / 64

SETUP
2-2
Assessments
The Assessments Display mode lists the literal description of the differences between the trial
and the standard. For example,
“PASS- The Trial is lighter, and stronger.”
The Assessments Display is shown as Figure 2-2.The assessments apply to each
component of the chosen color equation. For more information on Color Setup, refer to
“Using the Color Setup” on page 2-4.
Figure 2-2. Example of an Assessments Display
Tristimulus Display
You must have FMC-II chosen as the Color Equation to view the Tristimulus Display.
The Tristimulus Display mode lists the amounts (in percent) of the three components
necessary for matching a color: X, Y, and Z. For more information on choosing FMC-II as the
Color Equation, refer to “Choosing the Color Equation” on page 2-4. The Tristimulus display
is shown below:
Figure 2-3. Example of a Tristimulus Display
Indices
The Indices Display mode lists the index values for the standard and trial. The index values
are based on the Index you have chosen in the Color Setup. A maximum of six may be
displayed. Some index values are absolutes, while others are Delta values. For more
information on choosing the Index, refer to “Choosing the Index” on page 2-5.
The Indices Display is shown as Figure 2-4.
*** PASS ***
Trial Is:
LIGHTER
MORE RED
MORE YELLOW
NetProfiler: Active
CIELAB: A - 2
RAV-SCI
S:NP: Measured_Std
T:NP: Measured_Trial
DISP cal options data
^^^^
DISP cal options data
^^^^
X 1.85 1.83
Y 1.67 1.66
Z 0.61 0.60
x 0.4486 0.4481
y 0.04041 0.4043
NetProfiler: Active
CIELAB: A - 2
RAV-SCI
S: NP: Measured_Std
T: NP: Measured_Trial
Standard Trial