X-Rite COLOREYE XTH, Руководство по эксплуатации

Страница: 31 / 64

2-11
SETUP
minutes.
MSMNT (Measurement) Backup : This option prompts an automatic backup of all
measurements stored in RAM (volatile memory) once a specific number of
measurements has been taken. You can set the measurement backup between 5 and
100 at increments . The Default value if 50. For example, once the 50th measurement
is taken an automatic measurement backup is performed.
Checking NetProfiler Status
This option is for checking NetProfiler Status and enabling or disabling NetProfiler on your
spectrophotometer.
1. Select OPTIONS from the ColorEye XTH Main Menu .
2. Select SETTINGS from the Options Menu .
3. Select NETPROFILER from the Settings Menu .
4. The NetProfiler Setup is shown below:
5. There are two possible settings for NetProfiler: Enabled and Disabled . Press the
Enter key to toggle the setting. If you choose Enabled, NetProfiler is available to
profile the instrument. If you choose Disabled, you will turn off NetProfiler and no
instrument profiling is done.
6. Save the new NetProfiler Setting by scrolling the cursor to the [save] at the bottom
of the screen. When the [save] (lowercase) changes to [SAVE] (uppercase), press
Enter .
7. The NetProfiler Setting is saved.
Last NetProfile
14:31:46 16Sep02
Expiration Date
16Oct02
NetProfiler: Enabled
[save]
>