X-Rite COLOREYE XTH, Руководство по эксплуатации

Страница: 25 / 64

2-5
SETUP
Choosing the Illuminants
The ColorEye XTH offers 16 plus 4 customized illuminants. To choose an illuminant,
proceed as follows:
1. Select OPTIONS from the ColorEye XTH Main Menu .
2. Select COLOR SETUP from the Options Menu .
3. Select ILLUMINANTS from the Color Setup Menu .
4. You may choose from the following list of possible Illuminants. The list of
illuminants may be too long to fit on one display. Use the right arrow key to move to
the end of the illuminant display. Press the right arrow key to display the next
illuminant in the list. The list will increment one illuminant at a time. Use the left
arrow key to move to the beginning of the illuminant list and reverse the procedure.
Choosing the Degree Observer
You must choose between a 2 degree or 10 degree observer. To choose a degree
observer, proceed as follows
1. Select OPTIONS from the ColorEye XTH Main Menu .
2. Select COLOR SETUP from the Options Menu .
3. Select OBSERVER from the Color Setup Menu .
4. You may choose from the following list of possible observers:
Choosing the Index
Indices are single values that are calculated differently from color coordinates. Most of
them are intended to provide a single value for assessing the sample, rather than having
to interpret the meaning of color coordinates. To choose the index, proceed as follows:
1. Select OPTIONS from the ColorEye XTH Main Menu .
2. Select COLOR SETUP from the Options Menu .
3. Select INDEX from the Color Setup Menu .
4. Choose one of the following Indices:
Available Illuminants
A CWF SPLHOR D50 TL83
C DLF SPLD65 D55 TL84
U30 NBF SPLD75 D65 TL85
D75
Degree Observers
2 Degree
10 Degree
Indices
Whiteness
Yellowness
Strength
Miscellaneous